Tips on Installing Skylights in the Roof or Attic Conversion

Skylights offer a great way of allowing heat and light into dreary rooms. There are a couple of things to note when installing custom skylights onto the roof.

  1. First is deciding the desirable size of skylight and perhaps, skylight covers. For instance, you may find between two and four smaller windows better compared to a large one. Do ensure deliberating on your needs with suppliers or manufacturers prior to acquiring them, however. It is important to peruse the instructions for installation carefully once they are delivered.
  1. Second, a large nail is driven into the ceiling designated to hold the skylight. It is critical to wear shoes that have good grip when executing this step. One requires climbing onto the roof for locating the ideal position and removing the roof slates. It is necessary for the skylight not to interfere with a purlin or ceiling hanger. Companies for custom skylight repairs Melbourne has for example may perform this action flawlessly for you.
  1. Next is cutting the tiling battens and marking out the frame size meant to hold the custom skylights. You then require cutting the rafters and putting in trimmers in compliance with manufacturer’s directions, while checking out for any cables or wiring. This is followed by cutting away the plaster with saw, taking the skylight from its box then removing the trims and flashings.
  1. The fourth step is marking the skylight’s position on ceiling while ensuring one side fits next to ceiling joist, followed by driving a large nail through the middle. You may then remove the tiles, keeping them close by. The battens should now be cut using a circular saw or handsaw, followed by trimming the rafters as appropriate. Frame joints require being nailed well, in ease using a minimum of four 90 mm nails.
  1. Fifth is cutting into the sheet deeply from underneath using a knife. It should reduce the likelihood of tearing the lining paper. The skylight’s side-brackets require standing on framing members at this point, providing the opening has been made to correct size.
  1. Sixth, get the frame to stand in the position recommended before fixing it to the trimmers and rafters with the brackets provided. This has to be level at both ends across the roof. The bottom flashing should then be bent in line with the tiles’ contours to make it fit. This should later on be done for the top flashing, side flashing and other parts, after which the tiles may be refit around the custom skylights. You could utilize tile cutters or carborundum wheel affixed onto your circular saw for this operation (Protective gear need always be worn if the latter gadget is employed.)
  1. Following the above steps correctly would ensure the room below does not get damaged by water. The roof window should be positioned and fixed temporarily to one rafter, after double-checking it’s correct positioning while also adhering to the manufacturer’s guidelines. A spirit level should be used for checking flatness of the skylight.
  1. Replacing the roof slates is the final step to the exterior and involves some cutting. Remember clearing any debris that could block the down-pipes once done with this task.

You can check out http://customskylights.com.au for help with installing the desired Melbourne skylights in your home today.

 

 

 

Business Name: Custom Skylights
Name: Custom Skylights
Address: 29 Holloway Drive, Bayswater, Victoria, 3153
Contact Name: Paul Jones
Phone: 03 9761 1281
Logo URL: http://customskylights.com.au
Tagline: Custom Skylights - Innovative, Quality Skylights - We let the Sky Light in!
Trading Hours: 7.30am to 4.30pm
Trading Days: Monday-Friday
Payment Types: cash, cheque, direct deposit, credit card.
Year Founded: 1990

Leave a Reply

Your email address will not be published. Required fields are marked *