Category: Home & Gardens

Tips on Installing Skylights in the Roof or Attic Conversion

Skylights offer a great way of allowing heat and light into dreary rooms. There are a couple of things to note when installing custom skylights onto the roof.

  1. First is deciding the desirable size of skylight and perhaps, skylight covers. For instance, you may find between two and four smaller windows better compared to a large one. Do ensure deliberating on your needs with suppliers or manufacturers prior to acquiring them, however. It is important to peruse the instructions for installation carefully once they are delivered.
  1. Second, a large nail is driven into the ceiling designated to hold the skylight. It is critical to wear shoes that have good grip when executing this step. One requires climbing onto the roof for locating the ideal position and removing the roof slates. It is necessary for the skylight not to interfere with a purlin or ceiling hanger. Companies for custom skylight repairs Melbourne has for example may perform this action flawlessly for you.
  1. Next is cutting the tiling battens and marking out the frame size meant to hold the custom skylights. You then require cutting the rafters and putting in trimmers in compliance with manufacturer’s directions, while checking out for any cables or wiring. This is followed by cutting away the plaster with saw, taking the skylight from its box then removing the trims and flashings.
  1. The fourth step is marking the skylight’s position on ceiling while ensuring one side fits next to ceiling joist, followed by driving a large nail through the middle. You may then remove the tiles, keeping them close by. The battens should now be cut using a circular saw or handsaw, followed by trimming the rafters as appropriate. Frame joints require being nailed well, in ease using a minimum of four 90 mm nails.
  1. Fifth is cutting into the sheet deeply from underneath using a knife. It should reduce the likelihood of tearing the lining paper. The skylight’s side-brackets require standing on framing members at this point, providing the opening has been made to correct size.
  1. Sixth, get the frame to stand in the position recommended before fixing it to the trimmers and rafters with the brackets provided. This has to be level at both ends across the roof. The bottom flashing should then be bent in line with the tiles’ contours to make it fit. This should later on be done for the top flashing, side flashing and other parts, after which the tiles may be refit around the custom skylights. You could utilize tile cutters or carborundum wheel affixed onto your circular saw for this operation (Protective gear need always be worn if the latter gadget is employed.)
  1. Following the above steps correctly would ensure the room below does not get damaged by water. The roof window should be positioned and fixed temporarily to one rafter, after double-checking it’s correct positioning while also adhering to the manufacturer’s guidelines. A spirit level should be used for checking flatness of the skylight.
  1. Replacing the roof slates is the final step to the exterior and involves some cutting. Remember clearing any debris that could block the down-pipes once done with this task.

You can check out http://customskylights.com.au for help with installing the desired Melbourne skylights in your home today.

Business Name: Custom Skylights
Name: Custom Skylights
Address: 29 Holloway Drive, Bayswater, Victoria, 3153
Contact Name: Paul Jones
Phone: 03 9761 1281
Logo URL: http://customskylights.com.au
Tagline: Custom Skylights - Innovative, Quality Skylights - We let the Sky Light in!
Trading Hours: 7.30am to 4.30pm
Trading Days: Monday-Friday
Payment Types: cash, cheque, direct deposit, credit card.
Year Founded: 1990

4 Reasons to Choose a Split Level Home

A split level home is one of the modern house designs Sydney currently offers. This is the best choice for homeowners who want to step away from the ubiquitous style of the early home designs. At the same time, there are also plenty of other benefits to choosing this particular house plan. If you are looking at Mckeachies run home and land packages, you need to consider the split level homes in your buying decision.

Image result for house designs sydney

What is a Split Level Home?

The split level home is the epitome of a modern home design. It is perfect for homeowners who want some privacy in the specific rooms in the house. At the same time, it offers flexibility in terms of the use of space. A split level home is a style that was introduced during the turn of the 20th century. It was Frank Lloyd Wright who was credited for this style, which is often recommended as the best option for families looking for affordable first home buyer homes.

With a split level home, each section of the house is divided into spaces or “boxes”. Each box is designated its own level such that each section is separate from the other without necessarily building a level on top of the existing ones. It provides the privacy to separate the rooms from each other while still making each room accessible. Now that you understand what a split level home is, it is important to look into the reasons why it is worth the investment if you are building a new home.

Benefits of Split Level Homes

1. It maximizes the use of space. A split level home is one of the most popular house designs Sydney has available today because it takes full advantage of the available space in your lot. It has the same benefits of using vertical space that a two-storey home has. Therefore, you can expand your living space without compromising space that could have been used for the patio or backyard.

2. It is cost-effective to build. When your block of land has a significant slope to it, it would be difficult and expensive to cut the house plan that will accommodate traditional house styles. There are several factors that can cause the cost to go up such as poor soil condition or presence of large rocks in the land. Therefore, building a home that naturally fits into the block of land is more practical.

3. It allows you to have beautiful views. You do not need to build a mansion or several storey homes. With a split level home, you can take in the views of your local scenery.

4. It is a unique design. The unique structure and split level design will make your home stand out. This is the perfect choice for families who want a home that is functional but aesthetically pleasing too.

Are you looking for more ideas and plans for house designs Sydney offers today? You can visit http://www.edenbraehomes.com.au to find ideas from the best builders in Sydney.

ทำไมคุณจึงควรเลือกเครื่องนอนที่มีคุณภาพ

คงจะปฏิเสธไม่ได้ว่าการนอนเป็นสิ่งที่สำคัญกับชีวิตของคนเรามากที่สุดพอๆกับการดื่มน้ำและทานอาหาร มนุษย์เราไม่มีทางที่จะขาดสิ่งเหล่านี้ไปได้ ดังนั้นในเมื่อสุขภาพการนอนของเราสำคัญต่อร่างกายของเรามาก การเลือกที่นอนและเครื่องนอนจึงมีความสำคัญต่อสุขภาพการนอนและสุขภาพโดยรวมของเรามากเช่นกัน ยกตัวอย่างง่ายๆว่าหากเราเลือกประเภทของที่นอนที่ทำให้เรานอนไม่สบายตัวแล้วนั้น ก็จะทำให้เกิดปัญหาทซื้อผ้าปูที่นอนางด้านสุขภาพกายขึ้นกับเราและอาจนำไปสู่ปัญหาทางด้านสุขภาพใจได้อีกด้วย ซึ่งในท้ายที่สุดก็จะส่งผลกระทบกับการดำเนินชีวิตของเราในระยะยาว ดังนั้นเราควรที่จะใส่ใจกับการเลือกที่นอนและเครื่องนอนที่ดี

ซื้อผ้าปูที่นอน

ปัจจุบันมีที่นอนให้เราได้เลือกสรรมากมายหลากหลายประเภท การเลือกที่นอนนั้นควรพิจารณาจากสภาพร่างกายของตัวเราเอง ก่อนที่จะนำปัจจัยเหล่านี้ไปพิจารณาเลือกประเภทของที่นอนอีกทีหนึ่ง อาทิเช่น คนที่ไม่ชอบเตียงแข็งๆก็ควรหลีกเลี่ยงที่นอนประเภทที่ทำมาจากใยมะพร้าว เนื่องจากมีคุณสมบัติที่แข็ง และอาจทำให้รู้สึกไม่สบายตัวได้

นอกจากนั้น การเลือกเครื่องนอนก็มีความสำคัญ การเลือกซื้อผ้าปูที่นอน ปลอกหมอน หรือเครื่องนอนอื่นๆนั้น เนื่องจากเป็นส่วนที่มีการสัมผัสกับร่างกายโดยตรง ดังนั้นควรเลือกซื้อผ้าประเภทที่มีเนื้อผ้านิ่ม เพราะผ้าที่แข็งเกินไปอาจทำให้เกิดรอยยับได้ และรอยยับที่เกิดขึ้นนั้นอาจมากระทบหรือกดทับกับผิวหน้าหรือร่างกายบ่อยๆ จนทำให้เกิดปัญหาต่างๆตามมาได้ เช่น การระคายเคือง เป็นต้น ดังนั้นหากคุณกำลังเลือกซื้อเครื่องนอน คุณควรพิจารณาเลือกผ้าที่เมื่อลองสัมผัสดูแล้วให้ความรู้สึกสบายกับผิวและไม่หลุดเป็นขุย ซึ่งเนื้อผ้าที่นิยมใช้ทำเครื่องนอนได้แก่ ผ้าฝ้ายหรือที่เรียกว่า ผ้าคอตตอน หากต้องการที่จะเลือกผ้าประเภทนี้ ควรเลือกชนิดที่เป็นคอตตอน 100% เพราะเนื้อผ้าจะนิ่ม ไม่ระคายเคืองต่อผิว หรือหากอยากได้ผ้าชนิดที่นิ่มมากๆ อาจลองใช้เป็นผ้าคอตตอนซาติน ซึ่งเป็นผ้าที่ผสมระหว่างผ้าฝ้ายและผ้าไหม เนื้อผ้าจึงนิ่มและลื่นกว่าผ้าคอตตอน แต่ก็ทำให้ราคาก็สูงตามไปด้วย และอายุการใช้งานของที่นอน หรือ เครื่องนอนต่างๆ ไม่ควรที่จะเกิน 15 ปี หากเครื่องนอนที่บ้านของคุณมีอายุขัยมากกว่านี้ ให้ลองสังเกตดูว่าคุณเริ่มมีปัญหากับการนอนหรือไม่ เช่น ปวดตัวหรือปวดหลังบ้างหรือไม่ ที่นอนมีสภาพที่ยวบลงไปมากไหม หมอนที่ใช้นอนแล้วปวดคอหรือไม่ หากเครื่องนอนของคุณกำลังทำให้คุณไม่สบายตัว ก็แสดงว่าได้เวลาเปลี่ยนเครื่องนอนอันใหม่ได้แล้ว

การเลือกซื้อสินค้าที่อาจส่งผลกระทบต่อสุขภาพนั้น ให้ลองนึกไว้เสมอว่า ของดีมักจะราคาสมกับคุณภาพเสมอ ไม่มีสินค้าราคาถูกที่คุณภาพดีเลิศไปเสียหมด ดังนั้นคุณควรพิจารณาให้รอบคอบก่อนที่จะตัดสินใจซื้อ เพื่อสุขภาพที่ดีในระยะยาวของคุณและครอบครัว. Check MATTRESS CITY for more details.

Home Accessories: Everything You Must Know About Patio Heaters

To build a patio, you need to spend a lot of money for it. The addition of a patio into your home can significantly boost its value in the market. It, therefore, comes as no surprise why homeowners would be willing to invest money in building the perfect patio. A patio is considered an ideal living space during the summer so you can enjoy the beautiful scenery of your outdoor space. However, when it comes fall and winter, most homeowners would neglect their patio as it can become too cold to stay outside. Installing patio heaters with the help of builders specializing in patios Perth has should, therefore, be something you must give thought to.

Why Use a Patio Heater?

A patio heater is extremely useful and it’s something that you often don’t get to appreciate until the colder months come along. The use of heaters will allow you to get more use out of your outdoor space. When you add a heater for patios in Perth, you can get heat from any of these sources: 1) burning fuel such as natural gas, or 2) producing heat through electricity.

The builders of patios Perth WA has today would recommend the electrically powered heaters because they are safer (due to the lack of live fire). In addition, it would not produce smoke so you can sit comfortably on your patio without worrying about fire or smoke. However, it will depend on your patio as to what you would want to add to your patios Perth currently has to offer. It is therefore important to learn more about the types of heaters you could use in your patio Perth currently offers so you can make the right choice. Click here Platinum Outdoors

Types of Patio Heaters

Propane is the most common type of gas used in patio heaters. They are available in portable tanks that make it convenient as you can place them anywhere you need to. It is also designed to be easy to operate by simply turning on an ignition switch.

Another type of patio heater that is equally easy to operate is an electric heater. This is convenient because there is no need to set up – simply plug the heater into an electrical outlet and turn on. The only downside to electric heaters is that they are unable to produce as much heat as gas heaters. Hence, they are ideal for smaller patios.

The third type of heater that you can install on your patio is a natural gas heater. This one will require the help of professionals to connect your heater into an outdoor natural gas outlet. There is also no need to connect to an electrical outlet since you simply turn on an ignition switch. Once the gas is ignited, the heater will turn itself on.

Whether you need to install a heater or build a patio, it is best that you leave it to professionals. When it comes to patios Perth has, there is no better than the authority than Platinum Outdoors. You can get more information at their website: http://platinumoutdoors.com.au/.

What You Need to Know Before Installing a Skylight?

Are you thinking of cost-efficient ways you can brighten up the interior of your Melbourne home? Although installing light fittings may solve your dilemma, it will also increase your home’s energy bill. If this is the case, you may want to take advantage of natural sunlight and bring it inside your home. One way to do it is by installing skylights in strategic places in your home, like your kitchen, hallways, laundry room or bathroom for natural light to get in. Not only will they brighten up your interior, it will also lower your energy bill. Talking to experts in skylight installation Melbourne has today will help you figure out exactly where you need to have them installed.

There are various companies that offer skylight installation Melbourne wide that you can choose from. However, if you plan on doing it yourself, it is important that you take note of these pointers before starting any installation.

Choose Between Vented or Fixed

Before buying the materials, you have to decide which type of skylight you want to install in your home. If you want to have them in your kitchens and bathroom, opt for a vented skylight so that built-up moisture can escape as well as the excess heat. If you are worried about leaks, you can choose a fixed skylight as long as the material is of good quality. Proper installation is also important to ensure that your fixed skylight will be leak-proof.

Weather Watch

You want to make sure that the weather is favorable on the day of the installation. Rain and harsh weather can delay your project and you may find it difficult to continue once moisture gets in during installation. Talking to experts in skylight installation Melbourne companies have today may save you time and resources. They know when is the best time to have your skylights installed.

From the Inside Out

Make sure you have marked the box outlines for the skylights first before removing the interior sheathing. You can put nails or screws driven into the corners of the box outlines to make it easier to locate the opening from the roof. There are skylights that will fit between regular-sized rafters (24 or 16 inches) but if you want to have a larger skylight, you need to make a larger outline.

Exercise Caution

If you plan to install skylights yourself, make sure to use a ladder of the correct height and type. Don’t forget to put on footwear with the right traction to avoid slipping. If you think the angle is too difficult for you to work on, you can contact a trusted Melbourne skylights installation company to do the work for you. Prioritize safety over savings.

Choose Quality Materials

If you live in a bush fire prone area like Melbourne, VIC, make sure you choose fire rater skylights as these are made of noncombustible materials which will act as a barrier during a bushfire. It also reduces greenhouse effect with its energy saving glass products. You also have to consider other things like sound reduction, water tightness, and energy efficiency. You can talk to experts in skylight installations Melbourne has today for other options like UV coatings, ventilation, and shading or skylight covers. Make sure to buy directly from manufacturers to ensure that the products are made of sustainable materials.

The above are just a few pointers to remember before you install skylights. If your fixed skylight will have leaks or if the vented skylight will not close, you can easily contact experts in skylight repairs Melbourne has today to fix the problem for you. See more at http://customskylights.com.au/about-us

6 Crucial Mistakes to Avoid When Building Your New Home in Perth

Finally, you have decided to look for professional builders, such as Redink Homes, and start working on your new house in Perth that you have worked so hard to acquire. From the living room to the garden, you should now be eager to plan every part of it and make it your dream home. While this is an exciting process, it also requires careful decision-making to ensure the end results will meet your requirements. Otherwise, you will be having a home that will not best serve your needs. With this in mind, here are six crucial mistakes that you should avoid when building your new home:

1. Poor Space Planning

Whether you are building a small or large home, it is important to plan its spaces properly with adept new home builders Perth WA has. Determine how you use a certain area and consider its focal points, furniture layout, and sources of natural light. By doing so, you will be able to create a truly unique and functional space.

2. Adding Rooms That You Do Not Truly Need

While having a game room or multi-purpose room sounds enticing, it is still best to build rooms that you will actually use. Keep in mind that an under-utilised room often becomes a place where you just dump things that you no longer use. Nevertheless, you can still choose to add a spare room that can transition from one type to another.

3. Making Late Changes in the Plan

Professional builders, such as Redink Homes, normally give a go signal to a structurally sound floor plan, and deciding to make some late changes in it is often not a good idea. Take note that even simple alterations, such as moving a doorway, will require more time and increase overall costs.

4. Skipping Out on Inspections

Work with a licensed building inspector to conduct structural inspections at certain points in the construction process. This way, you will know that your home is already up to code before you move in and avoid finding yourself in a situation where you slowly learn that it is riddled with small problems that can worsen through time.

5. Allowing Other People to Tell You What You Need

While Perth new home builders and other professionals involved in constructing your home can make suggestions, they cannot tell you entirely what you should put in it. You are the one who best knows your needs, so you should also be the one who makes the ultimate decisions in designing your home.

6. Not Considering Your Home’s Resale Value

Though you do not initially intend to sell your dream home, you should still consider that you might have to put it on the market someday. This entails building it in a way that it would also appeal to buyers and be sold at the best possible price.

While building a new home can give you delight, it can also come with challenges too, which can be time-consuming and costly. Nevertheless, you can always avoid them and ensure your project will be very rewarding in the end. Now, for new home builders Perth has who can help you work around demanding situations, check out Redink Homes.

Business Name: redink homes
Name: redink homes
Address: 16 Frobisher St, Osborne Park WA 6017
Contact Name: Sales
Phone: (08) 9208 1111
Logo URL: https://www.redinkhomes.com.au/wp-content/uploads/2016/06/redink-logo-new.png
Trading Hours: 8:30am - 5pm
Trading Days: Mon - Fri

How to Find the Best Tile and Grout Cleaning Provider

Cleaning your tiled floor and bathroom wall at home may seem an easy task to do with the availability of different cleaning agents and do-it-yourself natural household and kitchen ingredients. However, cleaning tiles and grout in a commercial space and building need expertise and quality materials. There is a major difference between professional and DIY cleaners. That’s one reason why Brisbane tile and grout cleaning professionals encourage businesses to contact only the experts.

Over time, tiles and grout lost their luster and shine even with regular mopping. Dirt and grime will gradually settle in between tiles and will be embedded inside grout pores. Especially in Brisbane where businesses thrive, cleaning the tile and grout of your office is crucial as this makes one of the things that your guests and clients notice once they enter your door.

The Importance of Commercial Tile and Grout Cleaning Services to Your Business

Brisbane tile and grout cleaning services are highly competitive when it comes to their quality and accommodation. Before you find the best one, evaluate first the importance of cleaning your tile and grout the professional’s way.

  • Residue and contaminants are expertly removed compared to DIY cleaning practices. Since mopping and daily commercial maintenance can’t totally remove all the dust particles and grime from your floor, contaminants tend to build up in between tiles, thus, giving your floor a dirty and old look. Employing the right service provider for tile and grout cleaning in Brisbane can help you rejuvenate your floor.
  • Time and energy efficient. Cleaning the floor of a large commercial space using your own company resources can take a lot of time and effort. It also doesn’t guarantee you the best result. So, getting the best professional cleaning provider is the best thing to do.
  • Highly effective materials are used by professional cleaners. Since grout tends to accumulate dirt and moisture because of its porous surface, dust particles and grime will stick to the surface, making your floor looks untidy and old. Consider contacting the tile and grout cleaning Brisbane providers offer for tough cleaning services.
  • You can be given professional advice on how to maintain your floor’s luster and cleanliness. Since highly trained and experienced technicians and professional cleaners will do the task for you,  you will know of their techniques and effective ways to keep your tiles looking new for a long time.

Things to Consider when Looking for the Best Tile and Grout Cleaning Service

When looking for the best tile and grout cleaning in Brisbane, you must first evaluate the following important points.

  • Assess your specific cleaning needs in order for you to know exactly your preferences when hiring a tile and grout cleaning professional.
  • Know the price of a tile and grout cleaning provider that you wish to employ and consider comparing it to other providers as well.
  • Count the company’s number of years in the cleaning industry to evaluate its experiences and reliability.
  • Research about the company’s reputation in the industry.
  • License to operate and other legal documents are important in a business.
  • Customer’s feedback is also a reliable source to know whether a cleaning provider gives quality services. You can even ask other companies about their experiences from different Brisbane tile and grout cleaning services.

When you wish to bring back the shine and sleekness of your tiled floor, contact only the expert in tile and grout cleaning. Visit http://readycleaning.com.au/tile-grout-cleaning-brisbane-ipswich/ and learn about their quality services not only in tile and grout cleaning, but in carpet, steam, bond, mattress, and other cleaning services as well.